🛑How to open and close the wash for a holiday or weather closure.
The week before a scheduled holiday closure,
Make sure each kiosk has a taped sign notifying customers of the upcoming closure (scheduled holiday closures only).
Make sure the street signs are displaying that we are closed for the holiday. If no message is displayed, please get a message to Lauren.
Direct message Lauren Gallick on Slack or Google Chat, or send an email to [email protected]
The night before a holiday/weather closure,
Make sure the open/close signs are manually shut off.
CV1, CV3, CV5, CV10: (see Fig 1)
Log in to TunnelWatch with the username and password
cv1tw.cleanviewautowash.com
cv3tw.cleanviewautowash.com
cv5tw.cleanviewautowash.com
cv10tw.cleanviewautowash.com
Go to the Overrides tab
For Lanes 1/2/3 and Street Sign Open/Close, select “Force Off”
CV10 doesn't have an override for the open sign on the street sign, so you need to manually flip the switch the office to OFF.
CV4:
There is no TunnelWatch at CV4 so the lanes and street sign need to be manually turned off using the switches in the booth and the breaker at the street sign.
Lock all gates into the up position. (see Fig 2)
Unlock and remove the top lid of the gates with the little silver key.
Locate the black toggle switch in the top right labeled “service” next to it.
Flip the switch and the light will turn red. Service mode is enabled.
Now you can press the tiny arrow up button located below the small screen. Gate up.
It’s the 2nd one from the left.
Put the lid back on the gate and lock it using the little silver key.
The morning after a holiday/weather closure,
CV1, CV3, CV5, CV10: (see Fig 1)
Make sure the open/close signs are set back to “Auto”
Log in to TunnelWatch with the username and password
Go to the Overrides tab
For Lanes 1/2/3 and Street Sign Open/Close, select “Auto”
CV4:
Flip the switches in the booth for the Lane signs to “On”
Turn on the breaker to the street open/close sign.
Put the gates back into normal working order. (see Fig 2)
Unlock and remove the top lid of the gates with the little silver key.
Press the tiny arrow down button located below the small screen. Gate down.
Locate the black toggle switch in the top right labeled “service” next to it.
Flip the switch and the light will turn green. Service mode disabled. Now in normal mode.
Put the lid back on the gate and lock it using the little silver key.
Take down the kiosk signs and store for next year (scheduled holiday closures only)..
Fig 1. Setting TunnelWatch open/close signs to Force Off (when closing) or AUTO (for normal operation).
Fig 2. Service mode toggle located top right. Up down buttons located bottom left.
Last updated